Preliminary selection of clay minerals for the removal of pharmaceuticals,bisphenol A and triclosan in acidic and neutral aqueous solutions

Pharmaceuticals, personal care products and endocrine disruptors demonstrate huge potential to cause adverse ecological health effects at very low concentration in aquatic environment. There is a need to improve current purification technologies used in sewage and drinking-water treatment plants. This article aims at providing new insights into the recent development of natural and modified clay-based sorbents for the removal of aqueous contaminants such as pharmaceuticals and personal care products. The removal of six widely used pharmaceuticals: ibuprofen, diclofenac, ketoprofen, carbamazepine, as well as endocrine disrupting chemicals – bisphenol A and a bactericidal agent, triclosan – was examined by sorption onto eight adsorbents. Sorption was performed using natural and modified clay minerals – montmorillonite (Mt), vermiculite (VER), bentonite (B), kaolinite (K), commercial acid activated montmorillonites K10 and K30, and two carbonaceous-mineral nanocomposites, MtG5%T, BAlG3%C. This study showed that among the tested natural clays, vermiculite is the most promising sorbent for the removal of pharmaceuticals in purification processes. Among the modified clay minerals, the best results were achieved for carbonaceous bentonite and two acid activated montmorillonites K10 and K30. However, the removal of acidic pharmaceuticals on montomorillonite K10 and carbonaceous bentonite was strongly dependent on the pH value. In the case of vermiculite and acid-modified montmorillonite K30, the sorption of the selected compounds was not significantly affected by pH, which is crucial in wastewater treatment. The sorption constant divided by the specific surface area (K_d/A) is proposed to assess whether the surface area or chemical properties of the materials control the sorption process. K_d/A values were relatively high in the case of vermiculite, so it should be noticed that individual and specific surface properties of vermiculite were of crucial importance for sorption.     

Efficient Near-Infrared Electroluminescence from Lanthanide-Doped Perovskite Quantum Cutters

Perovskite nanocrystals (PeNCs) deliver size- and composition-tunable luminescence of high efficiency and color purity in the visible range. However, attaining efficient electroluminescence (EL) in the near-infrared (NIR) region from PeNCs is challenging, limiting their potential applications. Here we demonstrate a highly efficient NIR light-emitting diode (LED) by doping ytterbium ions into a PeNCs host (Yb³⁺ : PeNCs), extending the EL wavelengths toward 1000 nm, which is achieved through a direct sensitization of Yb³⁺ ions by the PeNC host. Efficient quantum-cutting processes enable high photoluminescence quantum yields (PLQYs) of up to 126 % from the Yb³⁺ : PeNCs. Through halide-composition engineering and surface passivation to improve both PLQY and charge-transport balance, we demonstrate an efficient NIR LED with a peak external quantum efficiency of 7.7 % at a central wavelength of 990 nm, representing the most efficient perovskite-based LEDs with emission wavelengths beyond 850 nm.     

Perfectly Encoding π-Conjugated Anions in the RE5(C3N3O3)(OH)12 (RE=Y,Yb, Lu) Family with Strong Second Harmonic Generation Response and Balanced Birefringence

Nonlinear optical (NLO) crystal, which simultaneously exhibits strong second-harmonic-generation (SHG) response and desired optical anisotropy, is a core optical material accessible to the modern optoelectronics. Accompanied by strong SHG effect in a NLO crystal, a contradictory problem of overlarge birefringence is ignored, leading to low frequency doubling efficiency and poor beam quality. Herein, a series of rare earth cyanurates RE₅(C₃N₃O₃)(OH)₁₂ (RE=Y, Yb, Lu) were successfully characterized by 3D electron diffraction technique. Based on a “three birds with one stone” strategy, they enable the simultaneous fulfillment of strong SHG responses (2.5–4.2× KH₂PO₄), short UV cutoff (ca. 220 nm) and applicable birefringence (ca. 0.15 at 800 nm) by the introduction of rare earth coordination control of π-conjugated (C₃N₃O₃)³⁻ anions. These findings provide high-performance short-wavelength NLO materials and highlight the exploration of cyanurates as a new research area.     

Influence of polymer reprocessing cycles on the microstructure and rheological behavior of polypropylene/mineral oil oleogels

The overall objective of this work was to study the effect of reprocessing cycles of isotactic polypropylene (PP) on the rheological behavior and microstructure of gel-like dispersions in mineral oil. PP was subjected to 10 reprocessing cycles and oleogel samples were further prepared by using the mixing rheometry technique and characterized from a rheological point of view and polarized light optical microscopy (PLOM). Recycled polymer samples were also characterized by means of rheological measurements, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) to evaluate the property changes induced by reprocessing. The values of different linear viscoelastic functions (elastic modulus and complex viscosity) of recycled PP decrease with the number of reprocessing cycles, which influences oleogel rheological response. An empirical exponential correlation between the storage modulus (G′) of PP samples and the plateau modulus ($G_N^o$) of oleogels has been proposed to predict the rheological behavior of oleogels. Results were explained considering the scission of PP chains induced by the thermomechanical reprocessing treatment applied.     

ICP-A ES法测定中国不同产地绒柄牛肝菌中矿质元素含量

采用微波消解处理样品,以电感耦合等离子体发射光谱法（IC P-A ES ）测定了采自云南省不同地点的绒柄牛肝菌菌盖和菌柄中的12种矿物质元素（P ,Na ,Ca ,Cu ,Fe ,Mg ,Zn ,As ,Cd ,Co ,Cr ,Ni）含量。结果显示：绒柄牛肝菌中P ,Ca ,Mg ,Fe ,Zn ,Cu的含量较高,其中菌盖中的P ,Mg ,Zn ,Cd较高,而菌柄中的Ca ,Co ,Ni较高;聚类分析结果显示,采用普洱地区的样品与其他地区的样品差异较大;主成分分析结果显示,前三个主成分的累计贡献率为77％,其中第一主成分中的P ,Ca ,Cu ,Fe ,Mg ,As ,第二主成分中的Ni ,Na以及第三主成分中的Cd和Zn对区分不同地点的样品贡献较大。结果表明采自不同生境地的食用菌元素含量差异较大。     

Critical temperatures of elements from their boiling points

A linear relation between critical temperature and boiling point is proposed for elements belonging to the same group in the periodic table. The validity of the relationship is demonstrated for the alkalies and the groups 16, 17 and 18. From this the critical temperature of tellurium is predicted as 2325?K and that for polonium as 2277?K.     

Conflict minerals (3TG): Mining production,applications and recycling

The growing public awareness of conflict minerals used in consumer electronics and various other devices (e.g. GPS in vehicles, medical equipment, airplane equipment and instruments, etc.) is accompanied by increasing regulatory obligations for companies affected by different laws and certification standards e.g. Dodd Frank Act section 1502, the ICGLR Regional Certification, the OECD Due Diligence Guidance or the planned EU Certification regulation.The so called conflicts minerals are natural mineral resources such as tin, tantalum, tungsten and Gold (3TG) that are critical resources for the electronic and automotive industries but also for other industries (aviation, medical equipment, etc.).Extraction of the 3TGs is widespread and includes primary industrial mining and artisanal mining as well as recycling.     

Influence of rheological additives on char formation and fire resistance of intumescent coatings

Styrene-butyl acrylate copolymer based fire retardant coatings were prepared using intumescent flame-retardant additives and mineral clay type rheological additives. Three different widely used nanoclays, organic-modified montmorillonite, palygorskite and sepiolite were applied in order to determine their effect on the flame retardancy. Significant differences were found when their heat-shielding activities were evaluated. It was observed that the addition of different clay particles in amount of 0.25 w% changes the char formation process; the height, the morphology, the structure and also the mechanical resistance of the protecting shield. The different geometry and composition of the additives induced different changes in fire performance. In case of palygorskite the catalytic effect of Fe accelerated mainly the thermal decomposition, therefore the fire resistance decreased. The plate-like montmorillonite reduced the extent of the intumescent char, whereas also improved the mechanical and sustained heat resistance of the fire protecting shield. The fibrous sepiolite of low Fe content assisted the development of efficient protecting shield, which exhibited optimal cell structure, suitable thickness, and thus ensured better heat-insulating performance. Consequently, fire retardant effect of sepiolite was found to be better than the other studied clay types.     

Low-temperature structural phase transition in synthetic libethenite Cu2PO4OH

Low-temperature structural properties of the synthetic mineral libethenite Cu₂PO₄OH were investigated by single-crystal X-ray diffraction, synchrotron X-ray powder diffraction, specific heat measurements, and Raman spectroscopy. A second-order structural phase transition from the Pnnm symmetry (a=8.0553(8) Å, b=8.3750(9) Å, c=5.8818(6) Å at 180 K) to the P2₁/n symmetry (a=8.0545(8) Å, b=8.3622(9) Å, c=5.8755(6) Å, β=90.0012(15) at 120 K) was found at 160 K during cooling. At 120 K, the monoclinic angle is 90.0012(15) from single crystal X-ray data vs 90.083(1) from powder X-ray diffraction data. The P2₁/n–to–Pnnm transition may be a general feature of the adamite-type compounds, M₂XO₄OH.     

传统文化蕴含的化学智慧在元素无机化学教学中的有机融入

在讲授元素无机化学时,把中国传统文化中所包含的化学知识、化学智慧有机地融入课堂教学,将元素无机化学讲授与课程思政教学有机融合,从而增加理科课堂的文化性、知识性和趣味性,激发学生的学习兴趣;同时培养学生的文化自信,激发学生的民族自豪感。